Hello, welcome to Ningbo Zhongyuan Pigment Co., Ltd.!

news
>news
Your current location:home>news

The development, application fields and slow rebound molding process of molding

page view:670 time:[2020-08-26]

As the main auxiliary agent for polyurethane foaming, color paste is widely used in various polyurethane materials. As a professional polyurethane color paste manufacturer in East China, our factory has the characteristics of high color concentration, good fluidity, large amount of addition does not affect foaming, bright color, and strong weather resistance...

1. The development and application of slow rebound in molding

 

1. Molding slow rebound development
 
 
 
Molded slow resilience is different from other ordinary sponges and high resilience sponges. They are usually called inert sponges, memory foams, low rebound or zero pressure sponges. When they are deformed by external force, they will not rebound immediately but will be delayed for a few seconds. Slowly restore to the shape before being pressed.
 
 
 
The main reason is that due to its special particle structure, honeycomb structure, the dense cell wall under the microscope can contain air, and only tiny holes communicate with the outside or neighboring cells. Therefore, when the external force is compressed, the speed of air entering and leaving the cell is blocked and the recovery is delayed. It reflects the special physical properties of slow rebound sponge.
 
 
 
 
 
2. The leading application of slow rebound molding
 
 
 
Automobile-headrest, lumbar support, cushion, etc.
 
 
 
Household items-pillows, cushions, pillows, mattresses, etc.
 
 
 
Others-toys, crafts, etc.
 
 
 
 
 
2. Slow rebound molding process
 
 
 
Slow rebound molding process
 
 
 
1. Ingredients
 
2. Check the equipment and measure the flow rate: start up, clean the filter screens of A and B material, nozzle AB of the machine head, stirrer, belt, and measure the flow of material A and B (first A and then B)
 
3. Set the injection parameters according to the product weight, adjust the ratio of A and B: set the injection time, the number of A material does not move, adjust the number of B material to control the product soft and hard.
 
 
 
4. The details that the new factory needs to pay attention to: there is liquid in the raw material tank of the new equipment, which needs to be cleaned up, whether the A and B material pumps are operating normally, and whether the machine head is normal

 

 

 We respect originality. The copyright belongs to the original author. The original author could not be contacted due to various reasons when some articles were pushed. If copyright issues are involved, please contact us and deal with it immediately.

 

 

 

 

 

 

 

 



 

 

 

 

 

 

 

       Factory Address: Longzhen Avenue, Longshan Industrial Zone, Cixi, Ningbo

           Marketing Center: 1308 Yaojiang Xindu, Hongtang Street, Jiangbei, Ningbo

Telephone:      +860574-86501282-0

                   83096225    83096226

 

 Facsimile:     +860574-86501283

 

    Web site:http://zy-pigment.en.alibaba.com/

prev:没有了 next:Molding slow rebound developme...